Minolta magicolor 330 Service Manual page 523

General Specifications continued
Category
Size and weight of base engine with the
MSI Tray retracted.
Not including the Xerographic Cartridge,
Waste Toner Box, Toner Cartridges, Oil
Roll Controller PWB.
Size and weight of Upper Tray
Size and weight of the Xerographic Car-
tridge, including the Waste Toner Box
Size and weight of the Waste Toner Box
Size and weight of each of the four Toner
Cartridges
Size and weight of the Oil Roll Assembly
Minimum space requirements; measured
from the printer covers to the wall
Operating environment needed for normal
operation
Operating environment needed for best
print quality
Maximum paper size
Maximum printable area
Best print quality printable area
magicolor 330 - Base Engine Service Manual
Height: 490mm ±1%
Width: 728mm ±1%
Depth: 641mm ±1%
Weight: 69.0kg ±1%
Height: 95mm ±1%
Width: 560mm ±1%
Depth: 547mm ±1%
Weight: 2.8kg ±1%
Height: 181mm ±1%
Width: 213mm ±1%
Depth: 510mm ±1%
Weight: 2.4kg ±1%
Height: 131mm ±1%
Width: 875.5mm ±1%
Depth: 444mm ±1%
Weight: 0.45kg ±1%
Height: 54.5mm ±1%
Width: 50mm ±1%
Depth: 400mm ±1%
Weight: 0.35kg ±1%
Height: 50mm ±1%
Width: 75mm ±1%
Depth: 430mm ±1%
Weight: 1.0kg ±1%
Front: 835mm
Back: 150mm
Right: 551mm
Left: 503mm
Top: 400mm
°
5~32 C @ 15~85% RH (no condensation)
0~2500m
No direct sunlight (less than 3,000 LUX)
°
10~32 C @ 15~85% RH (no condensation)
0~2500m
No direct sunlight (less than 3,000 LUX)
Upper Tray: 12 x 13 inch
Oversize Tray:13 x 18 inch
MSI: 3.5~13 inch x 5.5~19 inch
12.6 inch x 18 inch. Print quality may deteriorate within a 4mm mar-
gin around the sheet of paper
11.7 inch x 17 inch.
Printer Specifications
Specification
13-3