Minolta magicolor 330 Service Manual page 167

RRP 9.9 Operation Panel (PL1.1.60)
Removal
1. Remove the Top Cover Assembly (RRP 9.3).
2. Disconnect the Operation Panel P/J.
3. Press the tabs that are located on the sides of the Operation Panel while you push the Panel out of the
Top Cover.
Replacement
1. Position the Operation Panel as shown in the figure.
2. Press the Operation Panel into the opening in the Top Cover.
The Panel snaps into place.
3. Reconnect the Operation Panel P/J.
4. Reinstall the Top Cover Assembly (RRP 9.3).
magicolor 330 - Base Engine Service Manual
Removal and Replacement Procedures
9-23