Minolta magicolor 330 Service Manual page 191

RRP 9.21 Universal Paper Tray (PL2.1.1)
Removal
1. Slide the Universal Paper Tray (Tray 1) out of the printer until the Tray stops.
2. Lift the front of the Tray and remove it from the printer.
Replacement
1. Hold the Tray so the front is raised and insert the rear of the Tray into the printer.
2. Push the Tray in about an inch then lower the front so the Tray is horizontal and push the Tray all the
way into the printer.
magicolor 330 - Base Engine Service Manual
Removal and Replacement Procedures
9-47