Minolta magicolor 330 Service Manual page 183

RRP 9.17 Size Switch Assembly (PL3.1.23)
Removal
1. Remove the LVPS (RRP 9.119).
2. Remove the screw securing the Size Bracket to the printer frame and remove the Bracket.
3. Disconnect P/J 102 from the Size Switch PWB.
4. Remove the screw securing the Size Switch PWB to the Size Bracket and remove the PWB.
Replacement
1. Reinstall the Size Switch PWB onto the Size Bracket, making sure you line up the two plastic tabs at
the back of the PWB with the two holes in the Bracket.
2. Use one screw to secure the PWB to the Size Bracket.
3. Reconnect P/J 102 to the Size Switch PWB.
4. Reinstall the Size Bracket onto the printer frame and use one screw to secure the Bracket.
5. Reinstall the LVPS (RRP 9.119).
magicolor 330 - Base Engine Service Manual
Removal and Replacement Procedures
9-39