Minolta magicolor 330 Service Manual page 159

RRP 9.5 Front Lower Cover (PL1.1.5)
Removal
1. Remove Tray 1 from the printer.
2. Remove the two screws securing the Front Lower Cover to the printer frame and slide the Cover away
from the frame. (Figure 1)
Replacement
1. Slide the Front Lower Cover onto the printer frame, making sure the outside lip of the Cover is on top
of the lip of the frame as shown in Figure 2.
2. Use two screws to secure the Front Lower Cover to the printer frame.
3. Reinstall Tray 1.
magicolor 330 - Base Engine Service Manual
Removal and Replacement Procedures
9-15