Minolta magicolor 330 Service Manual page 219

RRP 9.35 MSI Long No Paper Sensor (PL4.3.16)
Removal
1. Remove the MSI Bottom Assembly (RRP 9.34).
2. Spread the latches securing the MSI Long No Paper Sensor to the MSI Bottom Assembly, and remove
the Sensor.
Replacement
1. Position the MSI Long No Paper Sensor onto the MSI Bottom Assembly so the position tab on the
Assembly fits through the positioning hole at the end of the Sensor.
2. Spread the latches and press the Sensor onto the MSI Bottom Assembly.
The latches lock the Sensor into place.
3. Reinstall the MSI Bottom Assembly (RRP 9.34).
magicolor 330 - Base Engine Service Manual
Removal and Replacement Procedures
9-75