Minolta magicolor 330 Service Manual page 313

RRP 9.82 Oil Roll Assembly (PL9.1.10)
Removal
1. Slide the Fuser Assembly out of the printer.
2. Hold onto the recessed handle and lift the Oil Roll Assembly out of the Fuser Assembly.
Replacement
1. Slide the Fuser Assembly out of the printer.
2. Hold onto the recessed handle and lower the Oil Roll Assembly into the Fuser Assembly.
3. Press on the Oil Roll Assembly until it snaps into place.
4. Slide the Fuser Assembly into the printer.
magicolor 330 - Base Engine Service Manual
Removal and Replacement Procedures
9-169