Replace Opc Drum - Minolta magicolor 330 Service Manual

3.55 - Error Message: Replace OPC Drum
The OPC Drum has reached end of life.
Logic control on the MCU PWB detected that the OPC Drum has printed 110,000 images.
Step
SUSPECT COMPONENTS
The following components are associated with this specific prob-
lem. One or more of these components may have failed partially or
completely. If you cannot isolate the problem using this FIP,
replace each component listed below, one at a time, until the prob-
lem disappears.
• Wiring and connectors linking the components
1
Replace the OPC Drum (RRP 9.48)
Does the error message still appear?
2
Replace the MCU PWB (RRP 9.123)
Does the error message still appear?
magicolor 330 - Base Engine Service Manual
Actions and Questions
Primary FIPS: Error Messages
Yes No
Go to step 2 Problem
solved
Go to suspect Problem
components solved
3-59