Minolta magicolor 330 Service Manual page 153

RRP 9.2 Inner Cover Assembly (PL1.1.10)
Removal
1. Remove the Front Cover Assembly (RRP 9.1).
2. Remove the Xerographic Cartridge (RRP 9.48).
3. Remove the Tension Lever (RRP 9.72).
4. Remove the seven screws securing the Inner Cover to the printer frame and remove the Cover.
Replacement
1. Position the Inner Cover against the printer frame, making sure the top of the Cover is under the lip of
the Top Cover.
2. Use seven screws to secure the Inner Cover to the printer frame.
3. Reinstall the Tension Lever (RRP 9.72).
4. Reinstall the Xerographic Cartridge (RRP 9.48).
5. Reinstall the Front Cover Assembly (RRP 9.1).
magicolor 330 - Base Engine Service Manual
Removal and Replacement Procedures
9-9