Minolta magicolor 330 Service Manual page 197

RRP 9.24 MSI Rear Cover (PL4.1.4)
Removal
1. Remove the MSI Assembly (RRP 9.22).
2. Remove the screw securing the top of the MSI Rear Cover to the MSI Frame.
3. Push down on the Cover latch while you pull the MSI Rear Cover away from the MSI Frame.
Replacement
1. Position the MSI Rear Cover next to the MSI Frame.
2. Hook the latch that is located on the inside of the Cover, under the top lip of the MSI Frame.
3. Push the Cover onto the Frame.
The Cover latch locks into place.
4. Use one screw to secure the top of the MSI Rear Cover to the MSI Frame.
5. Reinstall the MSI Assembly (RRP 9.22).
magicolor 330 - Base Engine Service Manual
Removal and Replacement Procedures
9-53