Minolta magicolor 330 Service Manual page 211

RRP 9.31 MSI Pick Up Solenoid (PL4.2.21)
Removal
1. Remove the MSI Rear Cover (RRP 9.24).
2. Disconnect P/J 201B.
3. Remove the screw securing the MSI Pick Up Solenoid to the MSI Frame and remove the Solenoid.
Replacement
1. Remove the MSI Rear Cover (RRP 9.24).
2. Hold down the MSI Pick Up Solenoid arm as you reinstall the Solenoid against the MSI frame.
3. Reposition the Solenoid so the two locating pins on the Frame line up with the two holes in the Sole-
noid.
4. Use one screw to secure the MSI Pick Up Solenoid to the MSI Frame.
5. Reconnect P/J 201B.
6. Reinstall the MSI Rear Cover (RRP 9.24).
magicolor 330 - Base Engine Service Manual
Removal and Replacement Procedures
9-67