The Fip Flowchart; Secondary Fips - Minolta magicolor 330 Service Manual

Printer Performance Problem Flow Chart
The FIP Flowchart should have directed you to this section. Start at your problem box, then follow the arrow leading
to the individual FIP that corresponds to that problem. Primary FIPs may direct you to a Secondary FIP. In the
Performance Problems Flowchart, the relationship between Primary and Secondary FIPs is represented
by dotted lines
Printer
Performance
Problem
magicolor 330 - Base Engine Service Manual
The printer is inoperative
There are no Panel lights & no printer warm-up
The printer has intermittent problems that are
not identified with any Error Code
Problems with the High Capacity Feeder
Primary Fault Isolation Procedures
Go to 4.1
Inoperative Printer
Go to 4.2
Erratic Printer Operation
High Capacity Feeder
Technical Manual
Section 6

Secondary FIPS

Primary FIPS
may direct you
to a specific
Secondary FIP
4-3