5.17 - The Printed Image Is Mottled - Minolta magicolor 330 Service Manual

5.17 - The Printed Image is Mottled

RS520X
Step
SERVICE HISTORY INSPECTION
Review recent service procedures done on the printer.
1
Were there any recent service procedures done on the printer
that involved removing the BTR Cam Solenoid or the 2nd BTR
Cam Assembly?
2ND BTR AND 2ND BTR CAM INSPECTION
1. Go to RRP 9.73 and remove the 2nd BTR Cam Assembly along
with the 2nd BTR Assembly.
2
2. Inspect the 2nd BTR Cam Assembly and the BTR Assembly for
damage.
Are the 2nd BTR Cam Assembly and the BTR Assembly dam-
aged?
Replace the Xerographic Cartridge (RRP 9.48)
3
Is the image still mottled?
Replace the 2nd BTR Assembly (RRP 9.75)
4
Is the image still mottled?
Replace the IBT Belt Assembly (RRP 9.78)
5
Is the image still mottled?
magicolor 330 - Base Engine Service Manual
PROBLEM
The printed image is either mottled or is textured like an orange peel. THE
PRINTER DISPLAYS NO ERROR MESSAGE.
• Pressure Roll (RRP 9.83)
• Heat Roll (RRP 9.84)
Actions and Questions
Primary Fault Isolation Procedures
Yes
Go to RRP 9.74 Go to step 2
and reposition
the BTR Ca
Solenoid
according to
instructions
Replace the Go to step 3
damaged
Assembly
Go to step 4 Problem solved
Go to step 5 Problem solved
Go to Suspect Problem solved
Components
No
5-35