Minolta magicolor 330 Service Manual page 203

RRP 9.27 MSI Edge Sensor (PL4.2.6)
Removal
1. Remove the MSI Top Cover Assembly (RRP 9.26).
2. Remove the screw securing the MSI Edge Sensor to the Top Cover and remove the Sensor.
Replacement
1. Reinstall the MSI Edge Sensor onto the MSI Top Cover Assembly, making sure the positioning tab on
the bottom of the Sensor fits into the hole in the Top Cover Assembly.
2. Use one screw to secure the MSI Edge Sensor to the MSI Top Cover Assembly.
3. Reinstall the MSI Top Cover Assembly (RRP 9.26).
magicolor 330 - Base Engine Service Manual
Removal and Replacement Procedures
9-59