Minolta magicolor 330 Service Manual page 161

RRP 9.6 Filter Assembly (PL1.1.32)
Removal
1. Press the Filter release tab as you pull up on the Filter.
2. Slide the Filter out of the slot in the Rear Cover.
Replacement
1. Position the Filter at the opening of the slot in the Rear Cover, making sure the release tab at the top of
the Filter faces the latch on the Rear Cover.
2. Press the Filter release tab as you slide the Filter into the slot.
3. When the Filter bottoms out, release the tab making sure the tab hooks into the latch on the Rear
Cover.
magicolor 330 - Base Engine Service Manual
Removal and Replacement Procedures
9-17