Minolta magicolor 330 Service Manual page 509

BD8 MCU PWB↔Fuser Tray Assembly↔Environment Sensor
The following table shows the signal names for this BD:
Signal Name
OIL CAM SOLENOID ON (L) 24VDC
CLEANER CAM SOLENOID ON (L) 24VDC
EXCHANGE SOLENOID PUSH ON (L) 24VDC
EXCHANGE SOLENOID PULL ON (L) 24VDC
FUSER CHUTE FAN ON (H) 24VDC
FUSER IN PAPER SENSED (L) 5VDC
ENVIRONMENT TEMP
magicolor 330 - Base Engine Service Manual
Wiring Diagrams and Signal Information
Switches the Oil Cam Solenoid. Low=On. High=Off
Switches the Cleaner Cam Solenoid. Low=On. High=Off
Switches the Exchange Solenoid so paper exits to Face Down
Tray.
Switches the Exchange Solenoid so paper exits to Face Up Tray.
Switches the Fuser Chute Fan. Low=Off. High=On
Signal from the Fuser Entrance Sensor. Low=Actuated. High=Not
actuated
Analog signal from the Environment Sensor
Description
12-19