Minolta magicolor 330 Service Manual page 42

Primary FIPS: Error Messages
3.25 - Error Message: Exit Jam, continued
Step
6
FUSER DRIVE ASSEMBLY OBSERVATION
1. Enter Diagnostics and test the Paper Handling Motor.
2. Observe the Fuser Drive Assembly.
Do the Gears of the Fuser Drive Assembly rotate smoothly?
7
EXIT ROLL OBSERVATION
1. Open the Exit Cover.
2. Actuate the Exit Cover Interlock Switch.
3. Enter Diagnostics and test the Paper Handling Motor.
4. Observe the Exit Rolls
Do all of the Exit Rolls rotate smoothly?
3-28
Actions and Questions Yes
Go to step 7
Go to suspect
components
magicolor 330 - Base Engine Service Manual
No
Replace the
Fuser Drive
Assembly
(RRP 9.110)
Replace the
Lower Exit
Assembly
(RRP 9.101)