Scanner Section; Screws That Must Not Be Removed; Removing And Reinstalling The Ccd Unit - Minolta Di551 Service Manual

SCANNER SECTION

[1] Screws that Must not be Removed

a. 14 screws securing the CCD unit
Screws that must not be removed
Screws that must not be removed
b. Read position adjusting plate screw (1 each)
1
4
3
1. Read position adjusting plate (left rear)
2. Read position adjusting plate (right rear)
3. Read position adjusting plate (left front)
4. Screws that must not be removed
[2] Removing and Reinstalling the CCD
a.
(1) Remove the right side cover (top), left side cover,
(2) Remove eleven screws to remove the lens light
4
2
4
1-C-1
SCANNER SECTION
Unit
Caution:
Be sure the power cord has been
unplugged from the wall outlet.
Caution1: Be sure to adjust the image after
installing the
"ADJUSTMENTS.")
Caution2: When disconnecting or reconnecting
connectors from / to the AD con-
verter board, be careful not to place
any stress on the board.
Procedure
original stopper plates (left and rear), platen
glass and top cover (right, left, front center, and
rear center). (See "EXTERNAL SECTION.")
blocking cover.
Screws (11)
Lens light blocking cover
CCD unit (See