Magenta Toner Missing - Minolta magicolor 330 Service Manual

Primary FIPS: Error Messages
3.29 - Error Message: Magenta Toner Missing
The Magenta Toner Cartridge is either not installed or not installed correctly.
Logic control on the MCU PWB did not receive a signal from the Cartridge Sensor when the Rotary Frame moved
the Magenta Developer Housing into position.
Step
SUSPECT COMPONENTS
The following components are associated with this specific prob-
lem. One or more of these components may have failed partially or
completely. If you cannot isolate the problem using this FIP,
replace each component listed below, one at a time, until the prob-
lem disappears.
• Wiring and connectors linking the components
• Rotary Frame Assembly (RRP 9.67)
1
MAGENTA TONER CARTRIDGE RESEAT
1. Remove the Magenta Toner Cartridge.
2. Reinstall the Magenta Toner Cartridge.
Does the error message still appear?
2
Replace the Magenta Toner Cartridge (RRP 9.56)
Does the error message still appear?
3
Replace the Toner Cartridge Sensor (RRP 9.69)
Does the error message still appear?
4
Replace the MCU PWB (RRP 9.123)
Does the error message still appear?
3-32
Actions and Questions Yes
Go to step 2
Go to step 3
Go to step 4
Go to suspect
components
magicolor 330 - Base Engine Service Manual
No
Treat as an
intermittent
problem.
Problem
solved
Problem
solved
Problem
solved