Minolta magicolor 330 Service Manual page 128

Primary Fault Isolation Procedures
5.14 - Damaged Prints, continued
Step
UPPER EXIT INSPECTION
1. Generate a test print and open the Upper Exit Cover just as the
sheet of paper reaches Exit Roll 3.
13
2. Inspect the sheet of paper.
Is the sheet of paper undamaged as it nears Exit Roll 3?
EXIT ROLL 3 INSPECTION
14
Is the sheet of paper undamaged until it reaches Exit Roll 3?
5-32
Actions and Questions Yes
Go to step 14
Go to Suspect
Components
magicolor 330 - Base Engine Service Manual
No
Clean or
replace the
Lower Exit
Assembly
(RRP 9.101)
and the Upper
Exit Assembly
(RRP 9.102)
Replace Exit 3
Roll Assembly
(RRP 9.105)