Minolta magicolor 330 Service Manual page 361

RRP 9.106 Top Exit Sensor (PL10.2.12)
Removal
1. Remove the Lower Exit Assembly (RRP 9.101).
2. Squeeze the four latches securing the Top Exit Sensor to the Lower Exit Assembly and remove the
Sensor.
Replacement
1. Slide the Top Exit Sensor Actuator through the slot in the Assembly.
2. Press the Sensor against the Lower Exit Assembly until the latches snap into place.
3. Make sure the Actuator moves freely.
4. Reinstall the Lower Exit Assembly (RRP 9.101).
magicolor 330 - Base Engine Service Manual
Removal and Replacement Procedures
9-217