Replace Btr2 - Minolta magicolor 330 Service Manual

Primary FIPS: Error Messages
3.54 - Error Message: Replace BTR2
BTR2 has reached end of life.
Logic control on the MCU PWB detected that BTR2 has processed over 100,000 images.
Step
SUSPECT COMPONENTS
The following components are associated with this specific prob-
lem. One or more of these components may have failed partially
or completely. If you cannot isolate the problem using this FIP,
replace each component listed below, one at a time, until the prob-
lem disappears.
• Wiring and connectors linking the components
1
Replace the 2nd BTR Assembly (RRP 9.75)
Does the error message still appear?
2
Replace the MCU PWB (RRP 9.123)
Does the error message still appear?
3-58
Actions and Questions Yes
Go to step 2
Go to suspect
components
magicolor 330 - Base Engine Service Manual
No
Problem
solved
Problem
solved