4-5-20.Removal Of The Power Unit (Pu1); 4-5-21.Paper Take-Up Sensor (Ps1) - Minolta QMS PageWorks/Pro 1100 Service Manual

4-5-20. Removal of the Power Unit (PU1)
1. Remove the Right Cover, Left Cover, Top Cover and Rear Cover.
2. Unplug PJ7 connector on the controller board and removes the harness from
the cord holder.
3. Remove the Power Unit (PU1). (4 screws, 2 connectors)
3501
3501
4121s064
4-5-21. Paper Take-up Sensor (PS1)
1. Remove the Power Unit (PU1).
2. Remove the Paper Take-up Sensor (PS1). (1 connector)
4121s065
3501
64
1305
4121s078