5.15 - Unfused Image Or Image Easily Rubs Off Of Page - Minolta magicolor 330 Service Manual

5.15 - Unfused Image or Image Easily Rubs Off of Page

RS514X
Step
IMAGE INSPECTION
1
Is the image density very light?
Replace the Temperature Sensor Assembly (RRP 9.88)
2
Is the image correctly fused?
Replace the LVPS (RRP 9.119)
3
Is the image correctly fused?
Replace the MCU PWB (RRP 9.123)
4
Is the image correctly fused?
magicolor 330 - Base Engine Service Manual
PROBLEM
The toner image is not completely fused to the paper. The image easily rubs off. THE
PRINTER DISPLAYS NO ERROR MESSAGE.
• Main Fuser Assembly (RRP 9.81)
Actions and Questions
Primary Fault Isolation Procedures
Yes
Go to FIP 5.1 Go to step 2
Light (Under-
toned) Prints
Problem solved Go to step 3
Problem solved Go to step 4
Problem solved Replace
Pressure
Heat Rod (RRP
9.85) and the
Heat Roll Heat
Rod
9.86)
No
the
Roll
(RRP
5-33