Minolta magicolor 330 Service Manual page 261

RRP 9.56 Magenta (M) Toner Cartridge (PL7.1.2)
Removal
1. Open the Front Cover.
2. Push up and hold the Rotary Latch Lever that is located above and to the left of the Rotary Knob.
3. Turn the Rotary Knob in the direction of the arrows printed on the Knob.
4. Stop turning the Knob when the Magenta Toner Cartridge is lined up within the cutout just below the
Rotary Knob.
The end of the Magenta Toner Cartridge is magenta, as is the end of the Magenta Developer Housing
the Cartridge fits into.
5. Release the Rotary Latch Lever.
6. Turn the Magenta Toner Cartridge handle counterclockwise until it stops.
7. Pull the Magenta Toner Cartridge out of the printer.
8. If you are replacing an old Magenta Toner Cartridge with a new one, dispose of the old Cartridge
according to the instructions presented in the Renoir User Manual.
Replacement
1. If you are replacing an old Magenta Toner Cartridge with a new one, prepare the new Cartridge
according to the instructions presented in the Renoir User Manual.
2. Open the Front Cover.
3. Push up and hold the Rotary Latch Lever that is located above and to the left of the Rotary Knob.
4. Turn the Rotary Knob in the direction of the arrows printed on the Knob.
5. Stop turning the Knob when the Magenta Developer Housing is lined up within the cutout just below
the Rotary Knob.
The end of the Magenta Developer Housing is magenta.
6. Release the Rotary Latch Lever.
7. Position the Magenta Toner Cartridge so the printed arrow is on the top of the Cartridge and is facing
the printer.
8. Slide the Cartridge as far as it will go into the printer.
9. Turn the Magenta Toner Cartridge handle clockwise until it stops.
The Magenta Toner Cartridge is now locked in place.
10. Close the Front Cover.
magicolor 330 - Base Engine Service Manual
Removal and Replacement Procedures
9-117