Minolta magicolor 330 Service Manual page 379

RRP 9.115 Rotary Motor PWB (PL11.1.21)
Removal
1. Remove the Rear Cover (RRP 9.4).
2. Remove P/J 246, P/J 247, and P/J 254 from the Rotary Motor PWB.
3. Remove the screw securing the Rotary Motor PWB to the printer frame and remove the PWB.
Replacement
1. Reinstall the Rotary Motor PWB onto the printer frame.
2. Reposition the PWB so the two positioning holes and the screw hole in the PWB line up with the two
positioning tabs and screw hole in the printer frame.
3. Use one screw to secure the Rotary Motor PWB to the printer frame.
4. Reconnect P/J 246, P/J 247, and P/J 254 to the Rotary Motor PWB.
5. Reinstall the Rear Cover (RRP 9.4).
magicolor 330 - Base Engine Service Manual
Removal and Replacement Procedures
9-235