Minolta magicolor 330 Service Manual page 497

BD2 MCU PWB↔ADC Sensor↔Erase Lamp↔Waste Toner Sensor↔CRUM
The following table shows the signal names for this BD:
Signal Name
LED ON (L) 5VDC
ADC SIG
ADC SOLENOID ON (L) 24VDC
ERASE LAMP ON (H) 5VDC
TONER BOX SENSED (L) 5 VDC
WASTE TONER SENSED (H) 5VDC
CRUM DATA
CRUM CLOCK
magicolor 330 - Base Engine Service Manual
Switches the ADC LED. Low=On. High=Off
Analog signal from the ADC Sensor
Switches the ADC Cleaning Solenoid. Low=On. High=Off
Switches the Erase Lamp. Low=Off. High=On
Monitors presence of Toner Box. Low=In place. High=Not in place
Monitors the level of toner in the Waste Toner Box. Low=Box not full.
High=Box full
Xerographic Cartridge CRUM data signal
Xerographic Cartridge CRUM clock signal
Wiring Diagrams and Signal Information
Description
12-7