Minolta magicolor 330 Service Manual page 199

RRP 9.25 MSI Tray Assembly (PL4.1.10)
Removal
1. Raise the MSI Tray until it is at approximately 90
2. Press in on the front arm of the MSI Tray as you pull the front of the MSI Tray free of the MSI Frame.
3. Slide the MSI Tray forward to free the rear of the MSI Tray from the MSI Frame.
4. Remove the MSI Tray Assembly.
Replacement
1. Position the MSI Tray so it is at approximately 90
2. Insert the rear arm (gear arm) of the MSI Tray into the rear of the MSI Frame.
3. Press in on the front arm of the MSI Tray as you insert the front arm into the front of the MSI Frame.
4. Move the Tray up and down to make sure it moves smoothly.
magicolor 330 - Base Engine Service Manual
Removal and Replacement Procedures
°
to the MSI Assembly.
°
to the MSI Assembly.
9-55