Minolta magicolor 330 Service Manual page 113

5.7 - Horizontal Streaks, continued
Step
1. Replace the Oil Roll Assembly (RRP 9.82).
2. Generate a test print.
5
3. Inspect the image on the sheet.
Is the image now normal, without horizontal streaks as it exits
the Fuser?
1. Replace the Xerographic Cartridge (RRP 9.48).
6
2. Generate a test print.
Is the image now normal, without vertical streaks?
DEVELOPER ASSEMBLY INSPECTION
1. Remove the Top Cover (RRP 9.3).
7
2. Turn the Rotary Frame and inspect the Magnet Roll of each of
the four Developer Assemblies.
Do the Magnet Rolls of each Developer Assembly appear smooth,
evenly formed and without obvious contamination?
magicolor 330 - Base Engine Service Manual
Actions and Questions
Primary Fault Isolation Procedures
Yes
Problem Replace
Solved Pressure
(RRP 9.83) and
the Heat Roll
(RRP 9.84)
Problem solved Go to step 7
Go Suspect Replace
Components faulty
oper Assembly
No
the
Roll
the
Devel-
5-17