Identifying External Media; Dual Video Port Status - Raritan Dominion KX III User Manual

Identifying External Media

Dual Video Port Status

When external media are connected to a port via virtual media, the media
icons display after the port name/number.
Icon Port state
Mass Storage
ISO/CD device
Microphone
Speaker
Smart Card Reader
The primary port must have Status=Up to make a connection to both
ports. The secondary port cannot be connected to directly, so its status is
not reflected in the Navigator.
If the secondary port has Status=Down, there is still a dual monitor
connection to both ports. There is either a "No Video" message or an
error message such as "Cannot switch to port" on the secondary client.
In this case, User Station acts differently from KX3, because User Station
allows the user to connect to any target, independent of the status, using
Using Filters
Filters. See
Chapter 5: Navigation and Access
(on page 50).
49