Accessing The Kx Ii-101-V2 Using The Cli; Ssh Connection To The Kx Ii-101-V2; Ssh Access From A Windows Pc - Raritan Dominion KX II-101-V2 User Manual

Accessing the KX II-101-V2 Using the CLI

SSH Connection to the KX II-101-V2

Access the KX II-101-V2 using one of the following methods:

TELNET via IP connection

SSH (Secure Shell) via IP connection

Multi-function admin serial port via RS-232 serial interface with
provided cable and a terminal emulation program like HyperTerminal
Several SSH/TELNET clients are available and can be obtained from the
following locations:

PuTTy - http://www.chiark.greenend.org.uk/~sgtatham/putty/
http://www.chiark.greenend.org.uk/~sgtatham/putty/

SSH Client from ssh.com -

Applet SSH Client -
http://www.netspace.org/ssh

OpenSSH Client -
Note: Accessing the CLI by SSH or TELNET requires you to set up
access in the Device Services page of the KX II-101-V2 Remote Client.
See Device Services (on page 111).
Use any SSH client that supports SSHv2 to connect to the device. You
must enable SSH access from the Devices Services page. See
Services (on page 111).
Note: For security reasons, SSH V1 connections are not supported by
the KX II-101-V2.

SSH Access from a Windows PC

To open an SSH session from a Windows
1. Launch the SSH client software.
2. Enter the IP address of the KX II-101-V2 server. For example,
192.168.0.192.
3. Choose SSH, which uses the default configuration port 22.
4. Click Open.
5. The login as: prompt appears.
Chapter 11: Command Line Interface (CLI)
www.ssh.com http://www.ssh.com
www.netspace.org/ssh
www.openssh.org http://www.openssh.org
Device
®
PC:
173