Command Line Interface (Cli); Overview; Accessing The Kx Iii Using Cli; Ssh Connection To The Kx Iii - Raritan Dominion KX III Administrator's Manual

Chapter 4: KX III Administrator Help

Command Line Interface (CLI)

228

Overview

The Command Line Interface(CLI) can be used to configure the KX III
network interface and perform diagnostic functions, provided you have
the appropriate permissions to do so.
CLI Commands
See (on page 232) for a list of all the commands,
definitions and links to examples.
The following common commands can be used from all levels of the CLI
to the preceding figure: top, history, logoff, quit, and help.

Accessing the KX III Using CLI

Access the KX III by using one of the following methods:
• SSH (Secure Shell) via IP connection
A number of SSH clients are available and can be obtained from the
following locations:
http://www.chiark.greenend.org.uk/~sgtatham/putty/
Putty -
•
http://www.chiark.greenend.org.uk/~sgtatham/putty/
SSH Client from ssh.com -
•
Applet SSH Client -
•
http://www.netspace.org/ssh
www.openssh.org http://www.openssh.org
OpenSSH Client -
•

SSH Connection to the KX III

Use any SSH client that supports SSHv2 to connect to the KX III. You
must enable SSH access from the Devices Services page.
Note: For security reasons, SSH V1 connections are not supported by the
KX III.
SSH Access from a Windows PC
To open an SSH session from a Windows
1. Launch the SSH client software.
2. Enter the IP address of the KX III server. For example, 192.168.0.192.
3. Choose SSH, which uses the default configuration port 22.
4. Click Open.
The login as: prompt appears.
Logging In
See (on page 229).
www.ssh.com http://www.ssh.com
www.netspace.org/ssh
PC:
®