Omron FQ2-S Series User Manual page 432

● Save Latest Input Image Data: 280F 00704020
Saves the latest input image to the SD card inserted in the Touch Finder as ifz data.
The destination for image data is the following fixed directory on the SD card.
\Sensor name\CAPTURE\Number
* Number is a five digit number starting from 00000. The images are saved in increments of 100 images for each number, and when there
are over 100 images, the directory with the next number is created.
Format
MRC SRC
(1 byte) (1 byte)
28 0F
Response Format
MRC SRC
(1 byte) (1 byte)
28 0F
End Codes
End code (hex)
0000
FFFF
Parameter Descriptions
Image data file name
Important
• If the specified file name already exists, this existing file will be overwritten.
• Do not turn off power to the Vision Sensor until there is a response.
430
Command Control
*
Vision Sensor command code
(4 bytes)
00704020
MRES SRES
(1 byte) (1 byte)
End code
Description
Command execution ended normally.
Command execution ended in an error.
Specifies the image data file name to save.
The file name extension (.ifz) can be omitted.
Image data file name
(4 to 64 bytes)
64 characters max.
Vision Sensor command code
(4 bytes)
00704020
FQ2-S/CH User's Manual
for Communications Settings