Omron FQ2-S Series User Manual page 183

Type of command Command
Load setting data CLBLOAD
commands
CGRLOAD
DICLOAD
DGRLOAD
Save setting data SCNSAVE
commands
SGRSAVE
SYSSAVE
IMAGESAVE
ALLIMAGESAVE
BKDSAVE
CLBSAVE
CGRSAVE
DICSAVE
DGRSAVE
FQ2-S/CH User's Manual
for Communications Settings
Abbreviation Function
None Loads calibration data that is stored
on the SD card inserted in the Touch
Finder as the data for the specified
calibration number.
None Loads all calibration data that is
stored on the SD card inserted in the
Touch Finder.
None Loads model dictionary data that is
stored on the SD card inserted in the
Touch Finder as the model dictio-
nary with the specified number.
None Loads all model dictionary data that
is stored on the SD card inserted in
the Touch Finder.
None Saves scene data to the SD card
inserted in the Touch Finder as a file.
None Saves all scene data as a file to the
SD card inserted in the Touch
Finder.
None Saves system data as a file to the
SD card inserted in the Touch
Finder.
None Saves image data saved in the Sen-
sor's memory by the logging function
to the SD card inserted in the Touch
Finder as ifz data.
AIS Saves all image data saved in the
Sensor's memory by the logging
function to the SD card inserted in
the Touch Finder as ifz data.
None Saves all setting data (all scene
data, system data, calibration group
data) for the Sensor to the SD card
inserted in the Touch Finder as a
backup file.
None Saves the calibration data with the
specified calibration number as a file
to the SD card inserted in the Touch
Finder.
None Saves all calibration data as a file to
the SD card inserted in the Touch
Finder.
None Saves model dictionary data as a file
to the SD card inserted in the Touch
Finder.
None Saves all model dictionary data as a
file to the SD card inserted in the
Touch Finder.
Control and Output in No-Protocol (TCP) / No-Protocol (UDP)
Reference
p.333
p.334
p.335
p.336
p.337
p.338
p.339
p.340
p.341
p.342
p.343
p.343
p.344
p.345
181