Omron FQ2-S Series User Manual page 317

<Parameter Descriptions>
Image adjustment item
(filter item/position com-
pensation item) number
Region number
Figure number
Parameter 1 to parame-
ter 21
*1 The regions are specified with the following values according to the image adjustment item (filter item/position compensation item) type.
Image adjustment item Command arguments
(filter item/position
Region number
compensation item)
type
Color Gray Filter 0 (Filter region)
Weak Smoothing 0 (Filter region)
Strong Smoothing 0 (Filter region)
Dilate 0 (Filter region)
Erosion 0 (Filter region)
Median 0 (Filter region)
Edge Extraction 0 (Filter region)
Extract Horizontal Edges 0 (Filter region)
Extract Vertical Edges 0 (Filter region)
Enhance Edges 0 (Filter region)
Background Suppression 0 (Filter region)
1 (Background suppression
calculation region)
Shape Search Position 0 (Position compensation
Compensation region)
1 (model registration region)
2 (measurement region)
Search Position Com- 0 (Position compensation
pensation region)
1 (model registration region)
2 (measurement region)
FQ2-S/CH User's Manual
for Communications Settings
Specifies the image adjustment item (filter item/position compensation item) number.
(0 to 7)
Selects the regions. The value that specifies each region differs according to the image
adjustment item (filter item/position compensation item) type.
The measurement region or model registration region range registers a complicated
model or a measurement region by combining a maximum of 8 figures (rectangles, cir-
cles, and other shapes).
Of those figures, specify the figure to change the range of using this command with the
*1
figure number.
Use the Acquire Image Adjustment Item (Filter Item/Position Compensation Item) Figure
command to check the figure numbers assigned to each figure in advance.
Acquire Measurement Region/Model Region Information Set for an Image
Adjustment Item (Filter Item/Position Compensation Item): p. 286
The settings for the model registration region or the measurement region are split up and
set in parameter 1 through parameter 21.
*2
Figure number
0
0
0
0
0
0
0
0
0
0
0
0
0
0 to 7
0
0
0 to 7
0
*1
Command Control
315