Omron FQ2-S Series User Manual page 424

● Save System Data: 280F 00703000
Saves system data as a file to the SD card inserted in the Touch Finder.
The destination for system data is the following fixed directory on the SD card.
\Sensor name\SYD
Format
MRC SRC
(1 byte) (1 byte)
28 0F
Response Format
MRC SRC
(1 byte) (1 byte)
28 0F
End Codes
End code (hex)
0000
FFFF
Parameter Descriptions
System data file name
Important
Do not turn off power to the Vision Sensor until there is a response.
422
Command Control
Vision Sensor command code
(4 bytes)
00703000
MRES SRES
(1 byte) (1 byte)
End code
Meaning
Command execution ended normally.
Command execution ended in an error.
Specifies the system data file name.
The file name extension (.syd) can be omitted.
System data file
name (4 to 64 bytes)
64 characters max.
Vision Sensor command code
(4 bytes)
00703000
FQ2-S/CH User's Manual
for Communications Settings