Omron FQ2-S Series User Manual page 350

TOTALDATASAVE or TDS
Saves statistical data saved in the Sensor's memory by the logging function to the SD card inserted in the
Touch Finder as csv data.
The destination for statistical data is the following fixed directory on the SD card.
\Sensor name\LOGDATA
The file name is automatically created as follows.
YYYY_MM_DD-HH_mm_record.csv
The date and time that make up the statistical data file name are not the date and time that the measurement
was performed, they are the date and time the statistical data file was saved from the Sensor to the Touch
Finder SD card by this command.
<Command Format>
T O T A L D
or
C
T D S
R
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
Important
Do not turn off power to the Vision Sensor until there is a response.
348
Command Control
Time that the statistical data was saved to the Touch Finder SD card
Date that the statistical data was saved to the Touch Finder SD card
C
A T A S A V E
R
FQ2-S/CH User's Manual
for Communications Settings