Omron FQ2-S Series User Manual page 253

Save All Scene Data
This command saves all scene data as a file to the SD card inserted in the Touch Finder.
The destination for all scene data is the following fixed directory on the SD card.
\Sensor name\SGP
The file name is not case sensitive. The file name extension can be omitted.
Command (PLC to Vision Sensor)
First word of com-
mand area
12 to 15
+2 0010
+3 0000
+4 0000
+5 0000
+6 0000
: :
+35 0000
*1 Saved as a file named SceneGroup_***.sgp. (***: Specified file number)
Response (Vision Sensor to PLC)
First word of
response area
12 to 15
+2 0010
+3 0000
+4 0000
+5 0000
FQ2-S/CH User's Manual
for Communications Settings
Bits
8 to 11 4 to 7 0 to 3
0000 0000 0000
0000 0111 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
: : :
0000 0000 0000
Bits
8 to 11 4 to 7 0 to 3
0000 0000 0000
0000 0111 0000
0000 0000 0000
0000 0000 0000
Contents
Command code
• EtherNet/IP, • PLC link
PROFINET File name to load
64 characters max.
File number to load
The file name exten-
(0 to 999)*1
sion (.sgp) can be
omitted.
---
Contents
Command code
Response target command codes
Response code
Command execution result
0: OK, FFFFFFFF: NG
251
Command Control