Omron FQ2-S Series User Manual page 412

● Set System Data: 280F 00504010
Sets the value to the specified system data.
System data numbers and details: p. 222
Command Format
MRC SRC
(1 byte) (1 byte)
28 0F
Response Format
MRC SRC
(1 byte) (1 byte)
28 0F
End Codes
End code (hex)
0000
FFFF
Parameter Descriptions
System data number* Specifies the number that corresponds to the system data to be set.
Setting value
410
Command Control
Vision Sensor command code
(4 bytes)
00504010
MRES SRES
(1 byte) (1 byte)
End code
Description
Command execution ended normally.
Command execution ended in an error.
Specifies the setting value to be set to the system data.
System data number (4 bytes)
3 digits max.
Vision Sensor command code
(4 bytes)
00504010
Setting value
(4 bytes)
Dependent on the
system data
(1,000 times the
actual value)
FQ2-S/CH User's Manual
for Communications Settings