Omron FQ2-S Series User Manual page 334

BKDLOAD
This command loads all setting data (all scene data, system data, calibration group data) for the Sensor saved
as a backup file from the SD card inserted in the Touch Finder.
The source for backup files is the following fixed directory on the SD card.
\Sensor name\BKD
<Command format>
B K D L O A D
Space (0x20)
<Response format>
When Processing Is Performed Normally
When Processing Is Not Performed Normally
<Parameter Descriptions>
All setting data backup file
name
Important
Do not turn off power to the Vision Sensor until there is a response.
332
Command Control
C
R
All setting data backup file name
Specifies the all configuration data backup file name to be loaded.
The file name extension (.bkd) can be omitted.
FQ2-S/CH User's Manual
for Communications Settings