Omron FQ2-S Series User Manual page 357

When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
File size scheduled to be sent
Calibration data number
Calibration data (binary)
PRECGRLOADB (Check) / CGRLOADB (Execute)
Loading all calibration data (binary data)
The Sensor loads all calibration data in binary data format.
To execute this command, two types of commands are used, a confirmation command and an execution
command.
For how to execute the command using the confirmation command and the execution command, refer to
Binary Data File Load and Save Commands: p. 183.
<Confirmation command format>
Before loading all calibration data in binary data format, the Sensor checks whether or not it can receive binary
data.
P R E C G R
<Confirmation command response format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
FQ2-S/CH User's Manual
for Communications Settings
Number of bytes of calibration data scheduled to be sent (integer type)
Specifies the calibration number you want to load. (Integer type)
Specify 0 to 31.
Calibration data to be loaded (binary data)
File size scheduled to be sent
L O A D B
Space
(0x20)
CR
Delimiter
Command Control
355