Omron FQ2-S Series User Manual page 344

BKDSAVE
This command saves all setting data (all scene data, system data, calibration group data) for the Sensor to the
SD card inserted in the Touch Finder as a backup file.
The destination for backup data is the following fixed directory on the SD card.
\Sensor name\BKD
<Command format>
B K D S A V E
<Response format>
When Processing Is Performed Normally
When Processing Is Not Performed Normally
<Parameter Descriptions>
All setting data backup file
name
Important
• If the specified file name already exists, this existing file will be overwritten.
• Do not turn off power to the Vision Sensor until there is a response.
342
Command Control
C
R
All setting data backup file name
Space (0x20)
This command specifies the all setting data backup file name.
The file name extension (.bkd) can be omitted.
FQ2-S/CH User's Manual
for Communications Settings