Omron FQ2-S Series User Manual page 417

● Load All Setting Data: 280F 00605000
This command loads all setting data (all scene data, system data, calibration group data) for the Sensor saved
as a backup file from the SD card inserted in the Touch Finder.
The source for backup files is the following fixed directory on the SD card.
\Sensor name\BKD
Format
MRC SRC Vision Sensor command code
(1 byte) (1 byte) (4 bytes)
28 0F 00605000
Response Format
MRC SRC MRES
(1 byte) (1 byte) (1 byte)
28 0F End code
End Codes
End code (hex) Meaning
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Parameter Descriptions
All setting data backup Specifies the all configuration data backup file name to be loaded.
file name The file name extension (.bkd) can be omitted.
Important
Do not turn off power to the Vision Sensor until there is a response.
FQ2-S/CH User's Manual
for Communications Settings
All setting data backup file name
(4 to 64 bytes)
64 characters max.
SRES Vision Sensor command code
(1 byte) (4 bytes)
00605000
415
Command Control