Omron FQ2-S Series User Manual page 227

System Type Item
data num-
ber
204 Parallel OR one-shot
Interface output time
Sensor
Data Unit
205 Parallel Output control
Interface
Sensor
Data Unit
206 Parallel Output period
Interface
Sensor
Data Unit
207 Parallel GATE ON delay 4
Interface
Sensor
Data Unit
208 Parallel Output time
Interface
Sensor
Data Unit
209 Parallel Timeout
Interface
Sensor
Data Unit
210 Parallel Number of
Interface delay
Sensor
Data Unit
211 Parallel ACK signal ON
Interface period
Sensor
Data Unit
251 RS-232C OR output
Interface
Sensor
Data Unit
252 RS-232C Judgment out-
Interface put mode
Sensor
Data Unit
253 RS-232C OR output
Interface delay time
Sensor
Data Unit
254 RS-232C OR one-shot
Interface output time
Sensor
Data Unit
FQ2-S/CH User's Manual
for Communications Settings
Data Range
size
4 1 to 10,000
4 0: No handshake
1: Handshake
2: Sync output
4 20 to 50,000
10 to 10,000
4 10 to 10,000
4 5 to 1,200
4 1 to 15
4 1 to 10,000
4 0: OK: ON
1: NG: ON
4 0: Level output
1: One-shot output
4 0 to 10,000
4 1 to 10,000
Description
Specifies the output time
(x0.1 ms) when using one-
shot output.
Specifies the control
method for output timing.
Specifies the period (x0.1
ms) for outputting mea-
surement results.
Specifies the ON delay
time (x0.1 ms) from when
outputting the results to the
parallel interface until out-
putting the GATE signal.
Specifies the time (x0.1
ms) the GATE signal output
is ON.
Specifies the timeout time
(x0.1 s) when using hand-
shaking.
Specifies the number of
delays when using syn-
chronized output.
Specifies the ACK signal
ON output time (x0.1 ms)
when outputting the ACK
signal.
Specifies the polarity when
the OUT0 output signal is
ON. Overall judgements
are supported.
Specifies whether output is
one-shot output or level
output.
Specifies the ON delay
time (x0.1 ms) until output-
ting the signal.
Specifies the output time
(x0.1 ms) when using one-
shot output.
Command Control
225