Omron FQ2-S Series User Manual page 137

First word of com- Command name
mand area (hex)
+2 +3
4060 0050 Set Terminal Offset Data
7010 0030 Set Communication Input Sta-
tus
7020 0030 Set Communication Output
Status
8010 0030 Set Terminal Status
8020 0030 Batch Set Terminal Status
8030 0030 Batch Set D Terminal Status
F000 0020 Set Execution Mode
● Load Setting Data Commands
First word of com- Command name
mand area (hex)
+2 +3
1000 0060 Load Scene Data
2000 0060 Load All Scene Data
3000 0060 Load System Data
5000 0060 Load All Setting Data
A000 0060 Load Calibration Data
B000 0060 Load All Calibration Data
C000 0060 Load Model Dictionary Data
D000 0060 Load All Model Dictionary Data Loads all model dictionary data that is stored
FQ2-S/CH User's Manual
for Communications Settings
Function
Sets the value of the terminal offset data that
is added to the IN0 to IN4 command parame-
ters
Sets the input status (allowed/prohibited) of
the communications port for the specified
communications protocol.
Sets the output status (allowed/prohibited) of
the communications port for the specified
communications protocol.
Sets the output signal ON/OFF status for the
specified parallel I/O terminal.
Batch sets the ON/OFF status for the all par-
allel I/O output terminals other than the D ter-
minals (D0 to D15).
Batch sets the ON/OFF status for the D termi-
nals (D0 to D15).
Sets the FQ2 execution status (execution
mode).
Function
Loads scene data that is stored on the SD
card inserted in the Touch Finder.
Loads all scene data that is stored on the SD
card inserted in the Touch Finder.
Loads system data that is stored on the SD
card inserted in the Touch Finder.
Loads all setting data (all scene data, system
data, calibration group data) for the Sensor
saved as a backup file from the SD card
inserted in the Touch Finder.
Loads calibration data that is stored on the
SD card inserted in the Touch Finder as the
specified calibration number.
Loads all calibration data that is stored on the
SD card inserted in the Touch Finder.
Loads model dictionary data that is stored on
the SD card inserted in the Touch Finder as
the model dictionary with the specified num-
ber.
on the SD card inserted in the Touch Finder.
Controlling Operation and Outputting Data with PLC Link Communications
Reference
p.235
p.236
p.237
p.238
p.239
p.240
p.241
Reference
p.242
p.243
p.244
p.245
p.246
p.247
p.248
p.249
135