Omron FQ2-S Series User Manual page 384

● Acquire Registered Image: 280F 00108020
This command loads a registered image saved to the SD card or PC Tool as the measurement image.
The registered image is the latest image or a logging image that has been assigned a number between 0 and
999 and has been registered in advance with the Set a Registered Image command.
Set a Registered Image p.381
Command Format
MRC SRC
(1 byte) (1 byte)
28 0F
Response Format
MRC SRC
(1 byte) (1 byte)
28 0F
End Codes
End code (hex)
0000
FFFF
Parameter Descriptions
Registered image num-
ber
382
Command Control
Vision Sensor command code
(4 bytes)
00108020
MRES SRES
(1 byte) (1 byte)
End code
Description
Command execution ended normally.
Command execution ended in an error.
Specifies the image to be loaded as the measurement image.
The image is registered in advance with the Set a Registered Image command and assigned a number.
(0 to 999)
Registered image number
(4 bytes)
3 digits max.
Vision Sensor command code
(4 bytes)
00108020
FQ2-S/CH User's Manual
for Communications Settings