REGIMAGE or RID
Set a Registered Image
Sets the latest image or a specified logging image as a registered image.
Registered images are saved to the following directory on the SD card or PC Tool.
\Sensor name\REGIMAGE
The image specified as a registered image can be loaded as a measurement image with the Acquire
Registered Image command.
Acquire Registered Image p.300
A maximum of 1000 registered images (image registration number: 0 to 999) can be set.
*
For the PC Tool, the data is saved in the "\..\My Documents\OMRON FQ\" folder.
<Command Format>
Command
R
E
G
I
M
A
or
R
I
D
Command
Registered
image number
(3 digits max.)
Space
(0x20)
<Response Format>
When the Command Is Processed Normally
O
K
CR
Delimiter
When the Command Is Not Processed Normally
E
R
CR
Delimiter
<Parameter Descriptions>
Registered image number Specifies the image to be loaded as the measurement image.
Registration source
Logging image number
FQ2-S/CH User's Manual
for Communications Settings
*
Registered
image number
(3 digits max.)
G
E
Space
(0x20)
Registration
Logging
source
image number
(1 digit max.)
(2 digits max.)
Space
Space
(0x20)
(0x20)
The image is registered in advance with the Set a Registered Image command and
assigned a number. (0 to 999)
Specifies the image to be set as the registered image.
0: Latest measurement image
1: Sensor logging image
This argument is only specified when setting the Sensor's logging images as registered
images. (0 to 19)
If the registration source is 0: Latest measurement image, this argument is not required.
Registration
Logging
source
image number
(1 digit max.)
(2 digits max.)
CR
Space
Space
Delimiter
(0x20)
(0x20)
CR
Delimiter
271
Command Control