Omron FQ2-S Series User Manual page 335

CLBLOAD
This command loads calibration data that is stored on the SD card inserted in the Touch Finder as the data for
the specified calibration number.
The source for calibration data is the following fixed directory on the SD card.
\Sensor name\CLB
<Command Format>
C L B L O A D
Space (0x20)
<Response Format>
When the Command Is Processed Normally
O K CR
Delimiter
When the Command Is Not Processed Normally
E R CR
Delimiter
<Parameter Descriptions>
Calibration number Specifies the calibration data number you want to load (0 to 31)
Calibration data file Specifies the calibration data file name you want to load. (64 characters max.)
name The file name extension (.clb) can be omitted.
Important
Do not turn off power to the Vision Sensor until there is a response.
FQ2-S/CH User's Manual
for Communications Settings
C
R
Calibration data file name
Space (0x20)
Calibration data number (2 digits max.)
333
Command Control