Omron FQ2-S Series User Manual page 416

● Load System Data: 280F 00603000
This command loads system data that is stored on the SD card inserted in the Touch Finder.
The source for system data is the following fixed directory on the SD card.
\Sensor name\SYD
Format
MRC SRC
(1 byte) (1 byte)
28 0F
Response Format
MRC SRC
(1 byte) (1 byte)
28 0F
End Codes
End code (hex)
0000
FFFF
Parameter Descriptions
System data file name
Important
Do not turn off power to the Vision Sensor until there is a response.
414
Command Control
Vision Sensor command code
(4 bytes)
00603000
MRES SRES
(1 byte) (1 byte)
End code
Meaning
Command execution ended normally.
Command execution ended in an error.
Specifies the system data file name to be loaded.
The file name extension (.syd) can be omitted.
System data file name
(4 to 64 bytes)
64 characters max.
Vision Sensor command code
(4 bytes)
00603000
FQ2-S/CH User's Manual
for Communications Settings