Omron FQ2-S Series User Manual page 411

● Set Camera Parameter: 280F 00501040
Sets the value for the specified camera parameter.
Camera parameter numbers: p. 219
Command Format
MRC SRC Vision Sensor command code
(1 byte) (1 byte) (4 bytes)
28 0F 00501040
Response Format
MRC SRC MRES
(1 byte) (1 byte) (1 byte)
28 0F End code
End Codes
End code (hex) Description
0000 Command execution ended normally.
FFFF Command execution ended in an error.
Parameter Descriptions
Camera parameter num- Specifies the number that corresponds to the camera parameter to be set.
*
ber
Setting value Specifies the setting value to be set to the camera parameter.
FQ2-S/CH User's Manual
for Communications Settings
Camera parameter number
(4 bytes)
3 digits max.
SRES Vision Sensor command code
(1 byte) (4 bytes)
00501040
Setting value
(4 bytes)
Dependent on the
camera parameter
(1,000 times the
actual value)
Command Control
409